Updated · GarageCue Editorial Team

How to choose headlights, light bars and car lighting

Compare car lighting on bulb type, beam pattern, fitment, warranty and returns, and check the local rules before you fit LED bulbs or light bars.

What car lighting covers

Car lighting spans replacement headlight bulbs, complete headlight units, fog lights, light bars and work lights. Replacement bulbs keep the car’s own lamps working, or brighten them. Light bars and work lights add extra light for off-road driving, farm work, towing or a work van. Each type needs a different approach, so start by deciding which job you are buying for.

Bulb types and the beam pattern

Halogen bulbs are the traditional fit. LED bulbs last longer and use less power, and HID lamps make bright light from a gas discharge. The bulb must suit the lamp housing. A lamp designed for halogen uses a reflector or projector shaped around a halogen filament, and a poorly made LED retrofit can scatter light and dazzle other drivers.

Look for a clean cut-off line on the dipped beam. Check the bulb base, such as H7 or H11, against your handbook, and allow for the extra depth of an LED bulb with a fan or heat sink behind the lamp. Some cars need an adapter or a CANbus decoder to stop warning lights.

Light bars and work lights

Light bars use rows of LEDs for a wide or long beam. Spot beams reach far, flood beams spread light close to the vehicle and combo bars mix the two. Check the waterproof rating, the mounting brackets and whether a wiring loom with a relay and switch comes in the box. Work lights suit a pickup bed, a trailer or a campsite.

Think about power draw and wiring. A large bar draws a lot of current, so the loom needs the right fuse and cable size, and a poor connection can melt. Mount the bar where it will not block the main headlights, the radiator airflow or a sensor, and fit a cover if it must stay on the car for road use.

Rules differ, so check before fitting

Rules on aftermarket lighting vary between countries and states. Some places restrict LED retrofit bulbs in halogen lamps, the colour of lights or when an extra light may be switched on. A product listing cannot tell you what is allowed where you drive, so check the local rules and inspection requirements before you buy and before you fit.

How the sellers differ

Oksiwa sells LED headlight bulbs in the US and Canada, with a search by vehicle, a 1-year warranty and a 30-day return window. SEALIGHT, founded in 2016, also focuses on LED headlight bulbs for the US and Canada. It allows 90 days for returns and offers chat and phone support.

LedEquippedCom sells light bars and work lights in the US, with a 3-year warranty and phone support. Baja Designs is a US brand founded in 1992 that makes LED headlights and light bars for the US and Australia, with a search by vehicle and a user community alongside phone and email support.

What to check before you buy

Confirm the bulb base or mounting for your car. Ask whether the product needs an adapter, a decoder or a separate driver. Check how long the warranty runs and what it covers, and whether you can return bulbs once they have been fitted. After fitting, have the headlight aim checked so the beam sits where it should and does not blind oncoming traffic.

Read how the seller describes brightness. Claims of extra light are hard to compare, as makers measure in different ways, and more raw output does not mean a better beam on the road. Beam shape, colour and how evenly the road is lit matter more than a big number on the box.

Replace bulbs in pairs so both sides match in colour and output. Keep the old halogen bulbs in the glovebox in case you need to refit them for an inspection or a trip abroad.

How to shortlist

Decide whether you need replacement bulbs or extra lights. Note your bulb type and check local rules. Keep sellers that list your car, then compare warranty, returns and support. The car lighting comparison sets the sellers side by side.

See the full ranking: Top headlights, light bars and car lighting compared →

Sources